CONNECT is a software utility that enables users to interface directly with any NexSens X-Series data logger using a UW6-USB-485P-DC cable. It supports a growing number of diagnostic and configuration tools to facilitate system setup and troubleshooting. Software Installation The CONNECT software requires a Windows-based device running Windows 10 or later. Fill out the form […]
Articles Tagged: Knowledge Base
Tag new knowledge base for search
Create a Custom Dashboard
Custom WQData LIVE Dashboards are user-configurable displays to show the most important project information directly on the main screen when a Project is opened. A default Project Dashboard displays on the main screen upon Project creation. To replace with a custom Dashboard, follow the steps below. Navigate to the Project Dashboard drop-down menu located at […]
Dashboard Panels
A WQData LIVE Dashboard contains multiple editable and interactive panels that can be adjusted to optimize display of project information and data. These panels provide project administrators and collaborators with the following: Information regarding the project overview and scope Site information Device and sensor parameters and measurements Information regarding contributors to the project *Note: Before […]
Setup Iridium (SBD) Data Account
All Iridium-enabled X-series loggers must have an active SBD (short-burst data) account in order to send measurement data to WQData LIVE. While NexSens Technology can configure and manage Iridium (SBD) data account plans, users may prefer to set up their own data services. Determine System Data Usage Requirements The following variables affect the amount of […]
Nortek Signature Current Profiler X2 Integration Guide
The Nortek Signature Series sensor is a high-performance acoustic doppler current profiler (ADCPs) used for measuring wave current velocity (via multiple cells), current direction, water temperature, and pressure. Configure Deployment Template Nortek’s Signature Deployment software must be used to configure a Signature Series sensor for use with an X2 Data Logger. Download and install […]
Nortek Signature Series Resource Library
X2 Integration Guide Warranty Service Request
Restore an iChart Project File Backup
Each time an iChart project (.icr) file is saved or closed, a backup copy is saved. If the .icr file is inadvertently deleted or corrupted, the project may be recovered by restoring a backup copy of the file. 1. If the corrupted iChart project file is currently running, go to File|Close Project . 2. Navigate to […]
Transfer iChart to a New Computer
To move all iChart files and settings from one PC to another: Identify the location of the software on the existing iChart computer. Generally it will be in one of the following directories. “C:\Program Files\NexSens” for Windows XP machines “C:\Program Files (x86)\NexSens” for Windows Vista and newer machines “C:\Users\Public\NexSens” as the recommended directory for new […]
Send iChart Log Files
During most troubleshooting procedures it is helpful for NexSens to have a copy of the log file created automatically by iChart during operation. This allows the technical support specialist to evaluate the cause of a problem. 1. Select Help | Open Tmp Folder from the iChart menu. 2. Arrange the files by modification date. 3. Locate […]
Mount an X2 Environmental Data Logger
The X2’s mounting kit accessory provides an easy way to attach the logger to a pole, pipe or wall. Mount an X2 to a 1-1/2 to 2″ (38 to 50 mm) pole by following the instructions in this guide. Alternatively, user-supplied screws may be used to mount an X2 to a wall. X2 Mounting Kit […]