Following a sensor detection, all diagnostic and sensor parameters are enabled for logging to the on-board micro SD card and transmission to WQData LIVE via the X2’s on-board telemetry. However, disabling transmission of individual parameters is possible. Disabling transmission of un-needed parameters is sometimes desirable to minimize the amount of unnecessary data sent. This is […]
Articles Tagged: Knowledge Base Software
Setting Rain Alerts
A separate section of the WQData LIVE Alarm tool allows G2-RAIN users to configure Rain Alerts. When triggered, such alerts notify project personnel that a rain event has occurred. Access this feature by navigating to ADMIN | Alarms at the top of the Project Dashboard. Expand the Rain Alerts section by clicking on the […]
Configuring Event-Based Transmission (G2/iSIC V2 Only)
Cellular G2 and iSIC V2 systems allow configuration of increased transmission frequency when a recorded parameter exceeds a user-defined threshold. This event-based transmission enables the system to upload data infrequently and minimize power and data consumption during normal operation, yet increase the frequency of logging and transmission of data during critical events. To configure event-based […]
Adjusting the Dashboard Map
The WQData LIVE Dashboard Map feature is an aesthetic and informative addition to the Dashboard display. The map gives the user a visual of the area surrounding the data logger, allows GPS-equipped loggers to be tracked, and contains visual updates to indicate triggering of system alarms. Map Features Click anywhere on the map to […]
Managing Quick Alert Notifications
The Quick Alert feature offers a quick method of configuring email/text message* notifications to send when an individual parameter crosses a basic threshold set by the user. While an alert is active, emails will repeatedly send for each uploaded reading that exceeds the parameter threshold. This feature is useful when using the more advanced Alarm […]
Setting Alarms
The Alarm feature offers an advanced method of configuring email notifications for parameter measurements. Alarms trigger based on one or more user-defined conditions established in the alarm configuration. Setting Alarms in Administrator Settings The ADMIN menu allows the user to activate alarms or quick alerts that notify project personnel any time that a certain parameter crosses […]
Configure X2 Base Radio Local Alarm
The CONNECT X2 base radio utility can monitor the status of configured alarms on a WQData LIVE project. When the base radio utility is enabled, a base radio X2 can optionally be tasked to trigger a local alarm in the event that traditional methods of notifications (SMS or email) are not available. This works by […]
Configure X2 Base Radio Data Collection
The majority of X2-Series Radio Systems will arrive pre-configured. Aside from establishing power and sensor connections, users utilizing an X2 PC base radio station for communication will need to load and configure the CONNECT software to begin acquiring data via WQData LIVE. Note: An active internet connection on the PC running the CONNECT software is […]
NexSens CONNECT Software User Guide
Setup Download and Establish Logger Connection Data Tab Direct Data Upload Access CONNECT Program Files X-Series Logger Configuration Sync X2 Logger Clock Erase Log Data Logger Programming Reset to Factory Defaults Configure Sensor Scripts Generate Generic Modbus Script Generate Generic NMEA0183 Script Generate Generic SDI-12 Script Generate Generic GSI Script Run Sensor Detection Log Tab […]
CONNECT Resource Library
CONNECT is a software utility that enables users to interface directly with any NexSens X2-Series data logger using a UW6-USB-485P cable. It supports a growing number of diagnostic and configuration tools to facilitate system setup and troubleshooting. User Guide