Updating iChart Software Updating iChart Moving iChart to a New Computer Restore a Backup iChart Project File Transfer iChart to a New Computer Placing a Project File (.icr) Into iChart Restoring an .idb File in iChart Backup or Transfer an iChart Project Updating iChart Project Changing Sensor SDI-12 Addresses Adding Devices to an Existing iChart […]
Reports iChart Data Reports Setup iChart Automatic Reports Send iChart Reports to National Data Buoy Center Graphing Parameters on the Same Axis in iChart Reporting Only the Most Recent Data Reorder Parameters in a Report Adjusting the Precision of a Report For Interval Rain Data, Generate Total Monthly Rain Report For Daily Rain Data, Generate […]
Advanced Features iSIC/SDL500 Code Updates in iChart iChart ODBC Connection Setup iChart Data Importing iChart Advanced Dialog Boxes and Menus Using iChart in Client/Server Mode Protecting an iChart Project File Setting Up Email Service in iChart Report Mode for iChart Creating an .idb File in iChart Reconfiguring a YSI Sonde With iChart Using Hyper Terminal […]
Troubleshooting How do I Change the 12-hour Clock to a 24-hour Clock in iChart? How do I See Headers in iChart’s Data Replication File? How do I Unregister iChart Software? Is the Old iChart Report Overwritten When a New Report is Automatically Generated? What can I do if iChart Stops Automatically Collecting Data? When I […]
Sensor Communication Resolving SDI-12 Sensor Communication Adding a LI-COR Sensor to iChart Adjusting the Offset of a Sensor Adjusting Barometric Pressure for Local Elevation Changing Lufft Weather Sensor Settings in iChart Connect a Lufft Weather Sensor for Configuration Configuring a YSI Sonde in iChart Reading mV Value From mV-RS485 Adapter Changing Lufft Configuration Settings via […]
Overview iChart Overview iChart Getting Started System Requirements Register iChart Install iChart Administrator Privileges Setup iChart Setup Device Wizard Program an iSIC Data Logger Set Sync Schedule for iSIC Real Time Clock to PC Clock Manual and Automatic Data Interrogation in iChart Changing Log and Sample Intervals in iChart iChart Project Monitor iChart Data Flags […]
Utilize the YSI ODO calibration utility to enter calibration coefficients when installing new DO sensor caps. Calibration coefficients are located on the “YSI ODO Sensor Cap Instruction Sheet” included with the new sensor cap. Once entering the coefficients, the user will need to perform a 1-point DO calibration within the utility. CONNECT will utilize the […]
Sensors utilizing serial communication that are not already listed in the X2 sensor script library can be configured to communicate with the X2 by generating a Generic General Serial Interface (GSI) script. Note: The X2 data logger only supports the RS-232 and RS-485 serial communication protocols. This utility requires a CONNECT firmware version of V2.22.7.2 […]
Using the GLOS API option in the Data Export tool, users can share their project data directly with the Great Lakes Observing System (GLOS) in the format recognized by GLOS. Saving/memorizing a template allows WQData to send data automatically at a specified interval. General To create a Data Export with the GLOS API: Navigate […]
