Data loggers and measurement data are organized into projects and sites on WQData LIVE. Projects may contain one or more sites for further organization, and each site may contain one or more data loggers. To create a project and site(s): Sign in to an existing WQData LIVE account. Hover over the email in the upper […]
Articles Tagged: Knowledge Base Software
Add a Data Logger to a WQData LIVE Project
During first-time configuration, data loggers are added to WQData LIVE projects using a Claim Code supplied with each data logger. To assign a data logger using a Claim Code: Log in to WQData LIVE and find the username in the top right-hand corner of the page. Mouse over the username to reveal a drop-down menu, […]
WQData LIVE Web Datacenter – FAQ
WQData LIVE Web Datacenter User Guide
First-Time Setup Create a WQData LIVE Account Create a Project on WQData LIVE Add a Data Logger to a Project on WQData LIVE Project/Site Dashboard Features Adjust the Dashboard Map Create Custom Project Dashboard Dashboard Panels Upload a Project Image Upload a Project Logo Parameters Settings Adjust Parameter Display Settings Device Remote Configuration Tool Access […]
WQData LIVE Resource Library
Datasheet Bid Specs User Guide FAQ
Specify Time Range for iChart Interrogation
There are certain instances where only a specific time range of data is desirable. When this is the case, only this range can be uploaded. However, be aware that it is not possible to later interrogate older data once a new time stamp is uploaded. Open iChart with the current project Hold down the SHIFT […]
Erasing the Memory of an iSIC Data Logger
The logger memory can be erased prior to deployment. Open iChart with the current project file Click Setup Place a check mark in the “Erase iSIC log memory” box Click Update iSIC Click Yes when prompted to confirm Wait for the memory to erase Click OK to exit the Setup Device window
Communicate with an Airmar WS in iChart
iChart has a built in interface to communicate with the Airmar WS series weather stations. This allows for setup and diagnostics. This interface was added in version V6.17.012. Update to the latest version of iChart if the current version is older than this. Updating iChart Open iChart Click Advanced | Sensor Interface | Airmar WS Terminal Select […]
Create a Data Replication File in iChart
Data replication duplicates all data as it is downloaded by iChart into a separate location on the computer. Below are Couple of notes regarding how this feature works. Data is still stored in binary format in the <ProjectFileName>.data folder like normal regardless of this setting Data is appended to this file every time new data is interrogated […]
Set SDI-12 for Continuous Measurements
Certain SDI-12 sensors require the use of the Continuous Measurements (aR0! … aR9!) command. In order to get the iSIC to operate in this mode, a flag must be set in the iSIC. 1. Enable the iSIC Command Tab in Advanced | iSIC | iSIC by following the steps in the below link https://www.nexsens.com/knowledge-base/software/ichart/enable-isic-command-tab.htm 2. Within […]