Wi-Fi only models of the X2 data logger can be configured to upload to the WQData LIVE datacenter over a local wireless network. To configure network settings: Establish a connection to the X2’s direct Wi-Fi network. Access the main menu by clicking the menu icon in the top right. Navigate to Settings | Network. […]
Articles Tagged: Knowledge Base Software
Adjust Auto-Report Generation Offset
Automatically generated reports from WQData LIVE often need to have their start times offset to accommodate for the upload delay (due to the latency of sensor sample acquisition and data logger telemetry connection processes) on the final data point. If no offsets are entered, reports that are delivered may be missing the most recent data […]
Connect to an X2 via Wi-Fi Direct
Most X2-series data loggers are equipped with on-board Wi-Fi Direct communications which can be used for logger configuration and/or transmission of data to the WQData LIVE web datacenter. Turn On Wi-Fi Outside of a scheduled transmission period, the Wi-Fi is powered off and must be activated to establish a connection. The primary method used to […]
Adjust Log/Transmit Intervals
The X2 Embedded Web allows sensor logging intervals and data transmission intervals to be adjusted. Establish a connection to the X2’s direct Wi-Fi network. Access the main menu by clicking the menu icon in the top right. Navigate to Settings | Logging. Set the desired logging interval for all connected sensors. Note that […]
X2 Data Logger Embedded Web User Guide
First Time Setup Connect to an X2 via Wi-Fi Direct Configure Network Connection Configure Advanced Network Connection Logger Controls Sync Logger Clock Queue Sensor Auto-Detection Request a Live Reading Change Sensor Logging and System Transmit Intervals
X2 Embedded Web
User Guide
Uploading a Project Picture
A Project Picture is displayed in the lower right corner of the default Project Dashboard as well as on the Project tile in a user’s Project selection list. It can also be added as a panel on any Custom Dashboard. To upload a Project Picture, navigate to the main Project Settings configuration menu. Click on […]
Managing Project Notes
The dashboard graph displays contain icons in the lower left that represent the Quick Alert and Quick Note features. Expand the menu options by clicking the circular Quick Action icon at the lower left of each parameter display. Quick Note Feature The Quick Note feature allows a user to enter in important field notes such as […]
Naming a Data Logger on WQData LIVE
Data loggers in a WQData LIVE Project can have custom names assigned. Loggers initially receive a default name that includes the logger type, telemetry type, and body tag number. Name changes are entered in the Device Remote Configuration menu on WQData LIVE. To configure custom names: Navigate to the Device Remote Configuration tool within the administrator settings. […]
Choosing Which Parameters Are Transmitted
Following a sensor detection, all diagnostic and sensor parameters are enabled for logging to the on-board micro SD card and transmission to WQData LIVE via the X2’s on-board telemetry. However, disabling transmission of individual parameters is possible. Disabling transmission of un-needed parameters is sometimes desirable to minimize the amount of unnecessary data sent. This is […]