Alarms can be quickly enabled and disabled from the configuration menu. To enable/disable alarms: Navigate to ADMIN | Alarms on the WQData LIVE Project Dashboard. To disable an active alarm, select the Enabled display filter to view all active alarms. Click on the alarm to disable. Click the Edit button (pencil icon) next […]
The LIVE Datacenter app allows anyone using the application to view basic data from all WQData LIVE Projects for which this feature has been enabled. To enable Project view in the LIVE Datacenter App: Enable and configure the Public Portal. Navigate to the ADMIN | Public Portal | Settings field, check the Include in LIVE […]
If a memorized (saved) report is no longer needed, it may be deleted. To delete a saved report: Select the saved report from the REPORT drop-down menu on the WQData LIVE Project Dashboard to load it. Click Customize in the upper-left corner of the report menu to load the report customization settings. Select the Settings tab […]
Alarm recipients organized as Groups or individuals can be updated in the Alarms/Alerts configuration menu for active alarms. To update alarm contacts: Navigate to ADMIN | Alarms on the Project Dashboard. Expand the Alarms/Alerts section by clicking on the gray bar (if it is not already showing). Note: When alarms are created, notification […]
WQData LIVE can run a remote sensor detection on an X2 data logger without the need to connect with a configuration cable. Before proceeding, reference the X2 Sensor Detection overview and the Auto-Detection Troubleshooting guide. The detection process will permanently alter the X2 data logger programming. Only attempt sensor detection when adding a new sensor […]
Custom WQData LIVE Dashboards are user-configurable displays to show the most important project information directly on the main screen when a Project is opened. A default Project Dashboard displays on the main screen upon Project creation. To replace with a custom Dashboard, follow the steps below. Navigate to the Project Dashboard drop-down menu located at […]
A WQData LIVE Dashboard contains multiple editable and interactive panels that can be adjusted to optimize display of project information and data. These panels provide project administrators and collaborators with the following: Information regarding the project overview and scope Site information Device and sensor parameters and measurements Information regarding contributors to the project *Note: Before […]
All Iridium-enabled X2 data loggers must have an active SBD (short-burst data) account in order to send measurement data to WQData LIVE. While NexSens Technology can configure and manage Iridium (SBD) data account plans, users may prefer to set up their own data services. Determine System Data Usage Requirements The following variables affect the amount […]
Project administrators can enable and configure a Public Portal, a unique page with a simplified live data display accessible through a public URL. This is useful for organizations wishing to share basic data with the general public and spread project awareness. Accessing the Public Portal Click on the ADMIN tab at the top of […]
Automatically generated reports from WQData LIVE often need to have their start times offset to accommodate for the upload delay (due to the latency of sensor sample acquisition and data logger telemetry connection processes) on the final data point. If no offsets are entered, reports that are delivered may be missing the most recent data […]
