A sensor can be removed from an iChart project file if the system setup has changed or needs to be redone. Note: The device will be reprogrammed in these steps and all data will be lost. Please download all data before proceeding. 1. Open iChart with the current project. 2. Select Project | Setup Device Wizard. […]
Articles Tagged: Knowledge Base
Tag new knowledge base for search
Add a Sensor to an iChart Project
A sensor can be added to an iChart project file if the system setup has changed or needs to be redone. Note: The device will be reprogrammed in these steps and all data will be lost. Please download all data before proceeding. 1. Open iChart with the current project. 2. Select Project | Setup Device Wizard. […]
Reading mV Value From mV-RS485 Adapter
The current measured mV value can be read at any time from the mV-RS485 Adapter using iChart’s interface. 1. Ensure the mV-RS485 Adapter is connected to the SDL and the SDL is powered. 2. Open iChart. Select Open Without Project if prompted. 3. Select Advanced | mV-RS485 Adapter | Setup… from the menu bar. 4. Select the correct PC COM Port and Connection type from the drop down lists. 5. Click Connect. […]
Adding Battery Voltage to an Existing Project
To add battery voltage, 1) Upload all your data before adding battery voltage. This procedure will erase all data in your data logger. 2) Select “Project | Setup Device Wizard” Menu 3) Click the “Next” button 3 times to get to the “Sensor” screen. 4) Click the iSIC that you want to log battery voltage. 5) […]
Setting up an SMS (Text Message) as an Email Alarm
iChart has the ability to be configured to send an alert or alarm as a text message to a cell phone. For this service to work, email service must first be configured in iChart. For more information on email configuration, see Setting Up Email Service in iChart. 1. Open iChart with a current project. 2. […]
Using iChart’s .ini File to Set Up SMS alerts
Using iChart software, it is possible to send SMS messages using a paid service that provides the GET method API. One such service is provided through smsmatrix.com, which is used as an example below. 1. If iChart is open, close it by clicking File | Exit. 2. Click Start Menu | Computer | OS | Program Files | NexSens | iChart 6. 3. Locate the ICHART.INI file. Click to open it […]
Correctly Scaling a LI-COR Sensor in iChart
It is important to enter the correct scaling information when adding a LI-COR sensor to a site in iChart. 1. Open iChart. 2. Click File | New Project. 3. Give the file a name. Click Save. The Setup Device Wizard will appear. 4. In the Setup Device Wizard, add a site in Step 1 and the data logger being […]
Reporting Only the Most Recent Data
In some applications only the most recent data is desired in a report. However, iChart software defaults to include all data when creating a new report. iChart settings can be changed so that only the most recent data is displayed. 1. Open iChart. 2. From the menu bar select Report | New Report or Report | Open Report to edit a […]
iChart Command Line Arguments
If a user would like to run iChart as a service, the following command line arguments may be used: o”icr file” – run iChart and open the icr file pab – run iChart at priority a, interrogate at priority b where a and b are: […]
Removing a Sensor From an Existing iChart Project File
The Setup Device Wizard in iChart software is used to add, edit, or delete devices contained within a project. Although device properties can be set from the navigation panel, the devices themselves cannot be added or removed. 1. Open iChart with a current project. Interrogate the appropriate iSIC data logger to retrieve all data stored within, because completing […]