Articles Tagged: Knowledge Base

Tag new knowledge base for search

Generating Data Reports

Data Reports are used to present data within WQData LIVE. Reports are highly customizable and may contain many combinations of project information, graphical and tabular data, statistics and alarms. Once generated, reports may be saved (“memorized”) for quick viewing in WQData LIVE, downloaded to PDF, sent via email or FTP, or configured with a schedule […]

Read More →

How to Cycle (Reset) Power on an iSIC-V2

Identify the 6-pin power source cable located at the bottom left hand side of the iSIC-V2.   Turn the connector bushing counter-clockwise until it is free from the port.   Gently pull back on the power cable to remove it from the logger port and wait at least 30 seconds.   Align the pins and […]

Read More →

Configure a Control Output on an iSIC-V2

Materials Required iSIC-V2 Firmware V8.02.14 or greater PC with iChart Software V6.20.021 or newer Serial Cable with USB Adapter Process Launch iChart and open the current project (.icr ) file  for the system. Right click on the logger in the Navigation Panel, select Property.  Connect a serial cable to the iSIC-V2 logger and select the […]

Read More →
← Previous
Next →