The SLA battery in the SP-series solar power packs require replacement in the event of failure, moisture intrusion, or every 3-5 years at a minimum. Use a NexSens A04 or equivalent size 12V SLA battery. Remove the Old Battery Remove the solar pack from its mounting location and place it on a flat work surface. […]
Articles Tagged: Knowledge Base
Tag new knowledge base for search
SP10/SP15 Solar Power Pack – FAQ
Replace G2-RAIN Internal Battery Pack
The G2-RAIN battery pack should be replaced once the reported system voltage drops to 6.2V or below. Battery packs for the G2-RAIN (G2-BAT-2D) are typically in stock and will ship the same day as they are ordered. Life expectancy for the batteries ranges from 1-3 years depending on the data logging interval, transmission interval, and […]
YSI 6-Series Resource Library
X2 Integration Guide Warranty Service Request
SDL-CAP Resource Library
Quick Start Guide Warranty Service Request
mV-RS485 Adapter Pinout
User-wiring to a mV-RS485 adapter using a UW-FLx cable. Only 0-2.5V sensor inputs are accepted. User must install voltage dividers if a chosen sensor has a higher native range. Resistors must be wired in with 4-20mA sensors to convert signal to mV for adapter. Adapter Receptacle Pin Signal NexSens UW-FLx Plug Pin NexSens UW-FLx Wire […]
NexSens mV-RS485 Adapter – FAQ
mV-RS485 Resource Library
Quick Start Guide FAQ How To Warranty Service Request
UW-FLxR Resource Library
Quick Start Guide Warranty Service Request
SP10 & SP15 Resource Library
Drawings Quick Start Guide How To Warranty Service Request