CB-WX-M BAL25 CAGE-AQDP CAGE-EXO CB-AQDP-M CB-CCA CB-MXM CB-RR CMB1 M-ARM-P CB-LI-M CB-WS-M M550-F-Y RS485-RS232 SDL-CAP TS-Clamp UW-FLxR UW-FWP WXT510-M M-ARM
Articles Tagged: Knowledge Base
Tag new knowledge base for search
Uploading a Project Logo
A company or organization logo can be configured to replace the default WQData LIVE image in the upper left corner of a Project page. Click on the ADMIN | Settings tab located at the top of the project dashboard. Open the Project/Site tab, then select Project to open the settings menu. Locate the […]
Install a SIM Card into an X2 Data Logger
While it is always recommended that a SIM card be sent to NexSens for installation prior to shipment, in some cases it may be necessary for an end user to install a SIM card. Caution!!!- Be sure to statically ground yourself prior to touching any of the electronics inside the X2 logger! Tools Required […]
Configuring Parameter Offsets
Any sensor parameter collected by an X2 data logger may have a linear offset applied to it. The Device Remote Configuration menu on WQData LIVE facilitates configuration of parameter offsets. To configure parameter offsets: Navigate to the Device Remote Configuration tool within the administrator settings. Select the Site and desired data logger to make adjustments. Scroll down […]
Changing Data Logger Transmission Interval
The Transmit Interval in the Device Remote Configuration Tool determines how often a data logger will power up its telemetry modem to contact the WQData LIVE web datacenter. On each transmission, the data logger will: Upload all newly logged data. Process all settings changes listed in the Command Queue. To update a data logger […]
Changing Sensor Log Intervals
Configure independent sensor Log Intervals for each device connected to an X2 or G2-Series data logger through the Device Remote Device Configuration tool. To update sensor log intervals in WQData LIVE: Navigate to the Device Remote Configuration tool within the administrator settings. Select the Site and desired data logger to make adjustments. Locate the Log […]
Adjust Parameter Display Settings
The display of parameter values on a project Dashboard is highly customizable. In the Parameter Settings menu, selections are available to modify parameter names, choose which parameters to display, convert display units and precision for individual parameters, set automatic filter values, and more. To adjust the parameter display settings: Click on the ADMIN tab and then […]
Create a WQData LIVE Account
WQData LIVE is a web-based project management service that allows users to collect and manage data from NexSens data logging platforms. The Basic tier is free to use, while the Advanced, Professional and Enterprise subscription tiers offer an array of advanced project and data management features. To get started with WQData LIVE, first, create an […]
Create a WQData LIVE Project/Site
Data loggers and measurement data are organized into projects and sites on WQData LIVE. Projects may contain one or more sites for further organization, and each site may contain one or more data loggers. To create a project and site(s): Sign in to an existing WQData LIVE account. Hover over the email in the upper […]
Add a Data Logger to a WQData LIVE Project
During first-time configuration, data loggers are added to WQData LIVE projects using a Claim Code supplied with each data logger. To assign a data logger using a Claim Code: Log in to WQData LIVE and find the username in the top right-hand corner of the page. Mouse over the username to reveal a drop-down menu, […]