Manually set a flash code Replace a battery
Articles Tagged: Knowledge Base
Tag new knowledge base for search
X2 SD Card Utility
The X2 SD Card Utility in CONNECT allows users to perform the following actions without needing to physically access the micro-SD card inside the X2 data logger: Send a file to the SD Card Transfer a file from the SD Card to the PC Delete a file off of the SD Card Access X2 […]
X2 Diagnostics
The X2 Diagnostics utility in CONNECT software enables users to perform the following functions: Read the logger’s diagnostic sensor suite Toggle sensor port power on/off Enable/disable on-board Wi-Fi Access X2 Diagnostic Utility Connect the X2 logger to a PC and launch the CONNECT software. Test connection by reading the RTC clock of the logger […]
Update Firmware
Firmware is updated periodically to add new features, support more environmental sensors, and resolve bugs. The X3 Environmental Data Logger includes built-in Bluetooth connectivity (BLE 5.0). Using the CONNECT software (version 4.24.5.2 or later), users can update the firmware wirelessly via Bluetooth. During the update, CONNECT will temporarily disable the logger’s internal schedule to prevent […]
Access CONNECT Program Files
On occasion it may be necessary to manually place program files provided by NexSens Technology into the CONNECT software folder. Select the DATA tab within CONNECT. Click the Open Data Folder button to view the CONNECT | Data folder directory. In the Windows File Explorer navigation bar, click CONNECT (highlighted above) to navigate to the parent […]
Generate Generic Modbus Script
Modbus sensors not already listed in the X2 sensor script library can be configured to communicate with the X2 by generating a generic Modbus script. Connect the X2 logger to a PC and launch the CONNECT software. Test connection by reading the RTC clock of the logger in the CONFIG tab. On the CONFIG tab, […]
UW6-BB Terminal Strip Wiring
Inside the UW6-BB enclosure the following components are connected via a screw terminal strip: (2) A01 Battery Solar Regulator (P/N N10108) 15V 1.6A AC/DC Adapter ( P/N N11756) Terminal Pin Wire Color Source Signal 1A – – – 2A – – – 3A – – – 4A Yellow Solar Regulator Charge Voltage In 5A […]
UW6-BB Maintenance Battery Backup
Maintenance of the UW6 Battery Backup system includes: Battery Box Battery Replacement whenever the voltage falls below ~11.0V, every 3-5 years, or if performance declines (whichever comes first) Replacement of the enclosure vent every 2-3 years, or if the vent sustains physical damage Desiccant replacement any time the enclosure lid is opened, or if moisture […]
Replace a Vent in a UW6-BB Battery Backup
The A70 enclosure vent in the UW6-BB should be replaced every 2-3 years, or in the event it becomes cracked or damaged. Open the battery backup enclosure lid using a Flathead screwdriver. Remove the pieces of spacing foam on top of the batteries and disconnect the leads from the batteries to remove power. […]
Replace a Desiccant in a UW6-BB Battery Backup
The desiccant bag inside the UW6-BB enclosure should be replaced whenever the enclosure lid is opened, or if moisture is observed inside the housing. Open the battery backup enclosure lid using a Flathead screwdriver. Remove the old bag of desiccant located in the bottom left or right corner of the enclosure, using tweezers […]