Graphing parameters on the same axis can be useful when comparing multiple graphs of the same parameter. These steps will provide instructions on how this can be achieved. 1. Open the Project File in iChart. 2. Open an existing report or create a new report by selecting Report | New Report. 3. Check parameters to be combined in […]
Articles Tagged: Knowledge Base
Tag new knowledge base for search
Using Hyper Terminal to Connect to a Device
iChart software has a built-in terminal program designed to communicate with devices. However, any terminal program may be used communicate as well. 1. Open Hyper Terminal, often located in the Windows start menu under All Programs | Accessories | Communications | Hyper Terminal. 2. Enter a name for the connection and click OK. 3. In the […]
Verifying to Which COM Port a Base Radio is Connected
In order for iChart to communicate with the base radio, the correct COM port needs to be selected. These steps will provide instructions on how to check which COM port needs to be selected in order to communicate. 1. Open iChart. 2. Select Advanced | Terminal. 3. Click … located to the right of the “Detail” box. […]
Adding Sensor That is Connected Directly to a Computer
Some sensors have the capability to connect directly to a computer without an iSIC data logger. To use these sensors, iChart has to be configured for a direct communication method using the Setup Device Wizard. 1. Open iChart with a current project, or create a new project by selecting File | New Project. 2. If the Setup Device […]
Reconfiguring a YSI Sonde With iChart
YSI sondes are compatible with NexSens iSIC data loggers and iChart software. iChart has a YSI Sonde Terminal designed specifically for sonde communication which can be used for device reconfiguration. For more information on YSI products, visit www.ysi.com. 1. Open iChart with or without a current project. 2. Connect the YSI sonde to the iSIC […]
Restoring an .idb File in iChart
An .idb file is a compressed data file for iChart software. Its main purpose is to store monthly data in a single file for ease of transport. The files can be created manually one at a time or automatically on a set schedule. 1. Open iChart without a project 2. From the menu bar select File […]
Backup or Transfer an iChart Project
NexSens iChart software stores projects in unique .icr files. Each file contains sites, iSIC data loggers, sensors, sensor parameters, and all other settings for each project. The backup function in iChart should be used to secure data and can also be used to transfer data between locations. 1. Open iChart with a current project. 2. […]
Creating an .idb File in iChart
An .idb file is a compressed data file for iChart software. Its main purpose is to store monthly data in a single file for ease of transport. The files can be created manually one at a time or automatically on a set schedule. 1. Open iChart with a current project. 2. From the menu bar […]
Changing Log and Sample Intervals in iChart
NexSens iSIC data loggers have the flexibility to change log intervals and sample intervals separately. These parameters are adjusted to fit the desired data frequency or to reduce power usage. Each time a sample is taken, measurements are recorded from the sensor(s) and stored within the iSIC data logger’s built in memory. Each time data […]
Matching Previous Parameters when Replacing a YSI Sonde
When replacing a YSI sonde into a NexSens data logging system, it is critical that the parameter list (parameters and units) that the sonde will output exactly matches the parameter list for the sonde in iChart. Otherwise, the data shown in iChart will not correspond with the correct parameter. These steps will show how to replace […]