Tag new knowledge base for search
Overview iChart Overview iChart Getting Started System Requirements Register iChart Install iChart Administrator Privileges Setup iChart Setup Device Wizard Program an iSIC Data Logger Set Sync Schedule for iSIC Real Time Clock to PC Clock Manual and Automatic Data Interrogation in iChart Changing Log and Sample Intervals in iChart iChart Project Monitor iChart Data Flags […]
The CB-75-SVS Wave Buoy is a simple, compact platform that integrates the NexSens X3-SUB Submersible Data Logger and the SeaView Systems SVS-603HRi wave sensor for both water and atmospheric observations. The SVS-603HRi sensor offers accurate measurements of wave height, period, direction, and more. Two additional sensor ports on the X3-SUB allow for further real-time observations […]
The following guides outline the instructions for interfacing environmental sensors with a NexSens iSIC data logger. Choose the appropriate sensor for the application. Airmar 150WX Ultrasonic WeatherStation Instrument Airmar SS510 Benthos PSA-916 Determining Turner Designs C-sense Scaling Factors Druck PTX 1830 FloWav PSA-AV FloWav StingRay Garmin 17x/19x HVS GPS High-Sensitivity Antenna Global Water WE710 Hydreon […]
The iSIC-V2 Modbus Output tool is designed specifically for applications utilizing a Programmable Logic Controller (PLC) with the Modbus communication protocol (RS-232 or RS-485). Firmware V8.2.023 or higher supports Modbus output. The iSIC V2 acts as a Modbus Master and pushes data to the PLC using the Modbus commands 0x10 (16). Data is pushed at […]
Real-Time Water Level Measurements The YSI Nile Radar Water Level Sensor provides non-contact, continuous level measurements. The sensor is compatible with NexSens X-Series data loggers using the SDI-12 communication protocol and sensor interface. A pre-defined script on X-Series data loggers is able to detect, log, and transmit all measurement parameters. Parameter data is transmitted, in […]
Real-Time Water Quality Measurements The Seametrics Turbo Turbidity Logger is a turbidity sensor with an integrated wiper and built-in data logging. The sensor is compatible with NexSens X-Series data loggers using the SDI-12 communication protocol and sensor interface. A user-generated script on NexSens X-Series data loggers is able to detect, log, and transmit all parameters […]
Real-Time Water Quality Measurements The Seametrics TempHion pH/ORP Logger is a pH/ORP and temperature sensor with built-in data logging. The sensor is compatible with NexSens X-Series data loggers using the SDI-12 communication protocol and sensor interface. A pre-defined script on NexSens X-Series data loggers is able to detect, log, and transmit all parameters available on […]
Real-Time Water Quality Measurements The Seametrics TempHion Bromide Logger is a bromide and temperature sensor with built-in data logging. The sensor is compatible with NexSens X-Series data loggers using the SDI-12 communication protocol and sensor interface. A pre-defined script on NexSens X-Series data loggers is able to detect, log, and transmit all parameters available on […]
Real-Time Weather Measurements The Gill MaxiMet GMX-Series Weather Stations measure a host of atmospheric and environmental parameters. The sensors are compatible with NexSens X-Series data loggers via the SDI-12 communication protocol and sensor interface. A user-generated or pre-defined script on NexSens X-Series data loggers can detect, log, and transmit all parameters output by the weather […]
During initial setup, when a sensor auto-detection is run, WQData LIVE receives an XML file that defines the logger’s sensor configuration (sensor ID, parameter IDs, units, etc.). This configuration is saved on the backend and used to process future data transmissions. When a new sensor detection is run to add or remove sensors/parameters, the XML […]
