Submit this form to generate a parts list for a NexSens turnkey data buoy configuration. For more information on the available components, see the CB-Series Data Buoy product pages.
Articles Tagged: Knowledge Base
Tag new knowledge base for search
Gill Maximet Weather Station – FAQ
Why is a YSI ODO RTU Not Gathering Readings?
The YSI ODO RTU X-Series Integration Guide outlines the required process for integrating YSI ODO RTU sensors with NexSens X-Series data loggers. If the sensor is not providing values after following the guide, below is a list of common reasons. Issues with Gathering Readings Issue #1: Two or more sensors connected to the data logger […]
YSI ODO RTU Dissolved Oxygen Sensor – FAQ
Custom Buoy Configurator
Submit this form to generate a parts list for a custom data buoy configuration. For more information on the available components, see the Custom Data Buoy Configuration Guide.
How to calculate application-specific data storage on X2 data loggers?
All X2 data loggers include a 256 MB internal SD card. Internal processes account for ~56 MB, leaving roughly 200 MB for data storage. Most applications will have years of available storage; however, this primarily depends on the logging frequency and the number of collected parameters. Below is an example calculation to estimate the number […]
Backdoor Communication for Lufft Weather Stations
Lufft weather stations use a universal address (ID = 200) in the instance that the device ID is unknown. For pre-configured sensors with altered communication protocols, there is a 10-second window after powerup where it is set to the default UMB protocol, and the software can communicate. If the communication protocol on a Lufft device […]
Lufft WS-Series Weather Station – FAQ
Why is a Eureka Sonde Not Detecting?
The Eureka Manta+ X-Series Integration Guide outlines the required process for integrating a Eureka Water Quality Sonde with a NexSens X-Series data logger. If a Eureka sonde fails to detect after following the guide, below is a list of common reasons. Issues During Detection Issue #1: More than one RS-232 sensor is connected to the same […]