The SonTek-SL1500 Side Looking Doppler Current Meter measures water current. It easily integrates with NexSens X-Series data loggers using the SDI-12 sensor interface. Sensor Setup Before the sensor can be deployed, it must first be set up through the manufacturer’s software. Follow the manufacturer’s guidelines for sensor setup. Be sure to note the SDI-12 […]
The Sea-Bird Scientific HydroCAT CTD measures conductivity, temperature, pressure, and optical dissolved oxygen. It easily integrates with NexSens X-Series data loggers using the SDI-12 sensor interface. Sensor Setup Before the sensor can be deployed, it must first be set up through Sea-Bird Scientific UCI software. Follow the manufacturer’s guidelines for sensor setup and set the […]
The NexSens T-Node FR Thermistor String provides high-accuracy temperature data at each node location in the water column. The sensor and cable assemblies are designed for temperature profiling up to 200 meters deep. 1. Install software and set up the computer Download and install NexSens CONNECT software on a field or lab computer. Plug […]
The SeaView Systems SVS-603HR Wave Sensor is a highly accurate wave sensor that reports heading, wave height, wave period, and wave direction. The sensor is compatible with NexSens X-Series data loggers via the RS-232 sensor interface. Connecting with X-Series Loggers Follow the steps below to connect the sensor to the X-Series logger through CONNECT software. […]
The In-Situ RDO PRO-X uses optical technology to measure dissolved oxygen and temperature in aquatic environments. The RDO PRO-X is compatible with NexSens X-Series data loggers using SDI-12. Sensor Setup Before the sensor can be deployed, complete sensor setup by following the manufacturer’s guidelines. Connecting with X-Series Loggers Next, the RDO PRO-X will […]
The YSI ODO RTU Optical Dissolved Oxygen Sensors utilize the most advanced DO measurement technology. It is often used in aquaculture, hydroelectric, and many other monitoring applications. The sensor is compatible with NexSens X-Series data loggers via RS-485 Modbus protocol. Sensor Setup Before the logger can be deployed, it must first be calibrated and set […]
The YSI ProSwap Loggers measure a variety of water quality parameters and are compatible with NexSens X-Series data loggers using the SDI-12 sensor interface. Sensor Setup Before the logger can be deployed, it must first be set up through the YSI KOR software. Follow the manufacturer’s guidelines for setup. Note: Be sure to note the […]
The In-Situ RDO Blue uses optical technology to measure dissolved oxygen and temperature in aquatic environments. The RDO Blue is compatible with NexSens X-Series data loggers using RS-485 Modbus protocol. Sensor Setup Before the sensor can be deployed, complete sensor setup by following the manufacturer’s guidelines. Connecting with X-Series Loggers Next, the RDO […]
The Lufft WS-Series Weather Stations simultaneously measure a combination of air temperature, humidity, pressure, precipitation, solar radiation, lightning, and wind with an integrated electronic compass. It is compatible with NexSens X-Series data loggers using the SDI-12 sensor interface. Sensor Setup Follow the manufacturer’s guidelines to set up and operate the sensor for SDI-12 output, and […]
While NexSens provides turnkey systems, the CB-Series data buoys are easily customized with user-preferred power supplies, electronics, sensors, accessories and mounting hardware. Buoy Platforms This document covers the CB-450, 650, 950 and 1250 customization. For XB-200 applications, see Customizing the XB-200. When selecting a buoy platform, careful consideration of anticipated sea state, battery and solar […]
