The telemetry antenna for cellular or radio X2-CB loggers threads onto a dedicated RF connector port on top of the CB-plate. If signal strength or connection reliability issues occur in the field, check and inspect the condition of the RF antenna connection. Component Overview Verify a Connection is Tight Grab the antenna bushing […]
Articles Tagged: cellular telemetry
Install a SIM Card into an X2-CB/X2-CBMC Cellular Logger
While it is always recommended that a SIM card be sent to NexSens for installation prior to shipment, in some cases it may be necessary for an end user to install a SIM card. Caution!!!- Be sure to statically ground yourself prior to touching any of the electronics inside the X2 logger! Tools Required […]
Set up a 4G Cellular Account for an X2 Data Logger
While NexSens can provision and manage a Verizon cellular account for an X2 Data Logger if desired, it may be preferred to set up and manage an account directly with a provider. The X2’s cellular telemetry requires a 4G-compatible SIM to operate. Please reference the following information for 4G cellular account setup: Step 1) […]
Collecting Environmental Data From Buoys
Deployment locations for data buoys are often remote. Wireless communication supports environmental monitoring and data collection from buoys in real-time.