X2-SDL Body Tag Identification

Each X2-SDL and SDL-V2 data logger has a body tag number for identification. The long housing tube has the tag etched between the antenna and sensor bulkheads.

The default name of the device on WQData LIVE will incorporate this number (see Figure 3).  NexSens technical support specialists will typically request the body tag for remote troubleshooting or if NexSens-supplied data services require activation or cancellation.

X2-SDL body tag

Figure 1: X2-SDL body tag location on the long enclosure tube opposite the NexSens logo.


Figure 2: Example body tag marking 1715.


Figure 3: X2-SDL default device name. Note all SDLs will have a ‘3’ entered in front of the Body Tag number.