Each X2 ships with a bag of desiccant placed underneath the data logger circuit boards. Replace this desiccant bag whenever: The X2 enclosure is opened. Moisture from condensation appears on the inside surface of the enclosure lid. The Internal Humidity diagnostic parameter reads 50% or greater. Use a desiccant pack provided by NexSens or any […]
X2-SDL & X2-CB data loggers are equipped with an onboard buzzer indicator to provide audible system status feedback to the user. X2-SDL/X2-CB Buzzer Indicator Status Lookup Event Beep Type Status When power is applied Short beep System boot successful During telemetry connection Two short beeps Connection successfully established During telemetry connection Three short beeps No […]
Setup Download and Establish Logger Connection Data Tab Direct Data Upload Access CONNECT Program Files X2 Configuration Sync X2 Logger Clock Erase Log Data Erase Sensor Programming Reset to Factory Defaults Configure Sensor Scripts Generate Generic Modbus Script Generate Generic NMEA0183 Script Generate Generic SDI-12 Script Generate Generic GSI Script Run Sensor Detection Log Tab […]
