The telemetry antenna for cellular or radio X2-CB loggers threads onto a dedicated RF connector port on top of the CB-plate. If signal strength or connection reliability issues occur in the field, check and inspect the condition of the RF antenna connection. Component Overview Verify a Connection is Tight Grab the antenna bushing […]
Articles Tagged: Knowledge Base
Tag new knowledge base for search
Eureka Manta+ Resource Library
X2 Integration Guide Warranty Service Request
CB-WX-M Resource Library
Quick Start Guide
CB-LI-M Resource Library
Quick Start Guide Warranty Service Request
Configure an iSIC-V2 to Post to WQData LIVE
iSIC-V2 data loggers equipped with Ethernet telemetry or an internal cellular modem are designed to push data directly to the WQData LIVE cloud datacenter. For systems integrating analog sensors or generic sensor types (where the default sensor auto-detection process is not feasible), it is necessary to program the data loggers first using the iChart software. […]
Establish Connection to an iSIC/SDL-V2 in Tera Term
Download the free open source terminal program Tera Term here. Select the link for the teraterm-4.97.exe file. The download will begin automatically. Complete the installation with the default components. Connect a UW6-USB cable to the PC. Allow Windows to download the driver automatically. Verify the COM port of the cable once the download is complete […]
UW-Field Wireable Plug – How To
UW-FWP Wiring
The UW-FWP and UW-FWP-V terminals provide a means of interfacing a flying lead sensor cable to a NexSens UW-8 SensorBUS connector such as the sensor ports on X2 and G2-series data loggers. The ‘-V’ variation is vented and should be used with vented pressure transducers. Cable wiring and installation instructions can be found here. […]
Replace the SD Card within an iSIC-V2
Caution!!!- Be sure to statically ground yourself prior to touching any of the electronics inside the iSIC V2 logger or the SD card itself Tools Required: -9/16″ Socket Wrench -5/32″ Allen Wrench Remove the UW-6 and UW-8 (if Equipped) connectors from the base of the iSIC V2 housing. Remove the (4) 3/8-16 bolts […]
iSIC V2 Data Logger Mount
The PM1 Pole mount kit is designed to attach an iSIC V2 to a buried 2″NPT Pipe for field deployment. Included (2) 5/16-18 x 2″ U-bolts (4) ea 5/16″ Flat Washers, 5/16″ Split Lock Washer, and 5/16″ Nut (2) Mounting Ear (4) 1/4-20x 7/16″ Flat Head Phillips Screw Mounting Install one of the mounting ears […]