FloWav StingRay

    Instructions for interfacing the FloWav StingRay with a NexSens iSIC data logger: IMPORTANT: Review the manufacturer’s manual for the sensor to ensure that the sensor is properly configured for integration with a third party data logger prior to connecting the device to the iSIC. 1. Route cables and wires through one of the gland fittings […]

    Read More

    RM Young 41342

    Instructions for interfacing the RM Young 41342 with a NexSens iSIC data logger: IMPORTANT: Review the manufacturer’s manual for the sensor to ensure that the sensor is properly configured for integration with a third party data logger prior to connecting the device to the iSIC. 1. Route cables and wires through one of the gland […]

    Read More

    Airmar WS Terminal

    iChart has a built in interface to communicate with the Airmar WS series weather stations. This allows for setup and diagnostics. This interface was added in version V6.17.012. Update to the latest version of iChart if the current version is older than this. Updating iChart Open iChart Click Advanced | Sensor Interface | Airmar WS Terminal Select […]

    Read More

    LI-COR LI-200R

    Instructions for interfacing the LI-COR LI-200R with a NexSens iSIC data logger: IMPORTANT: Review the manufacturer’s manual for the sensor to ensure that the sensor is properly configured for integration with a third party data logger prior to connecting the device to the iSIC. 1. Route cables and wires through one of the gland fittings […]

    Read More

    SonTek IQ Flow Sensor

    Instructions for interfacing the SonTek IQ Flow Sensor with a NexSens iSIC data logger. IMPORTANT: Review the manufacturer’s manual for the sensor to ensure that the sensor is properly configured for integration with a third party data logger prior to connecting the device to the iSIC.  1. Route cables and wires through one of the gland […]

    Read More

    In-Situ Aqua Troll 400 Multi-Parameter Probe

    Instructions for interfacing the In-Situ Aqua Troll 400 Multi-Parameter Probe with a NexSens iSIC data logger. IMPORTANT: Review the manufacturer’s manual for the sensor to ensure that the sensor is properly configured for integration with a third party data logger prior to connecting the device to the iSIC.  1. Route cables and wires through one of […]

    Read More

    Vaisala HMP60 Humidity and Temperature Sensor

    Instructions for interfacing the Vaisala HMP60 Humidity and Temperature Sensor with a NexSens iSIC data logger. IMPORTANT: Review the manufacturer’s manual for the sensor to ensure that the sensor is properly configured for integration with a third party data logger prior to connecting the device to the iSIC.  1. Route cables and wires through one […]

    Read More

    Vaisala PTB110

    Instructions for interfacing the Vaisala PTB110 with a NexSens iSIC data logger: IMPORTANT: Review the manufacturer’s manual for the sensor to ensure that the sensor is properly configured for integration with a third party data logger prior to connecting the device to the iSIC.  1. Route cables and wires through one of the gland fittings installed […]

    Read More

    Determining Turner Designs C-sense Scaling Factors

    The Turner Designs C-sense pCO2 sensor is available in three ranges: 2400-001: 0-1000 ppm 2400-002: 0-2000 ppm 2400-003: 0-4000 ppm To interface the C-sense to a NexSens iSIC or SDL500 data logger, the 0-5 VDC output is scaled to 0-2.5 VDC with a voltage divider. This needs to be taken into account when determining the […]

    Read More

    RM Young 61302V Barometric Pressure Sensor

    Instructions for interfacing the RM Young 61302V Barometric Pressure Sensor with a NexSens iSIC data logger. IMPORTANT: Review the manufacturer’s manual for the sensor to ensure that the sensor is properly configured for integration with a third party data logger prior to connecting the device to the iSIC.  1. Route cables and wires through one of the […]

    Read More