What sensor scripts are available on X-Series loggers?
X-Series loggers come pre-loaded with scripts for a host of environmental sensors that communicate over standard protocols such as SDI-12, NMEA0183, RS-232, and RS-485 Modbus. The entire script list is visible within the CONNECT software; however, only a few are enabled by default. Before running a sensor detection, it is imperative to review this default list to see if the script for the desired sensor is available and enabled.
Script Levels
| Script Level | Description |
| 0001 | Script 0001 controls the internal diagnostics for the X2 data logger. These diagnostics are critical for troubleshooting and must be kept enabled. |
| 0002 | Script 0002 controls the internal diagnostics for the X3 data logger. These diagnostics are critical for troubleshooting and must be kept enabled. |
| 1000 | 1000-level scripts are for sensors utilizing RS-485 Modbus RTU communication. |
| 2000 | 2000-level scripts are for sensors utilizing SDI-12 communication. |
| 3000 | 3000-level scripts are for sensors utilizing RS-232 communication. |
| 4000 | 4000-level scripts are user-generated generic scripts. |
| 5000 | 5000-level scripts are generated by NexSens engineers and will contain a hard-coded detection for a specific sensor. |
| 9000 | 9000-level scripts are highly customized scripts created by NexSens engineers. These scripts are created for entire systems with specific circumstances.* |
*Since 9000-level scripts are for an entire system, only one 9000 level script can be enabled at a time. The X2 will only recognize the lowest numerical 9000-level script.
Available Scripts
| Script Number | Script Name |
| 0001 | NexSens X2 Internal Diagnostics |
| 0002 | NexSens X3 Internal Diagnostics |
| 1000 | NexSens T-Node FR/TS210 |
| 1001 | APG PT-500 |
| 1002 | Lufft Weather Stations |
| 1003 |
NexSens mV-Rain Adapter
|
| 1004 |
In-Situ Aqua Troll 200/400/600
|
| 1005 |
Seametrics CT2X/PT12
(Only use with absolute pressure gauge)
|
| 1007 |
FloWav PSA-AV
|
| 1008 | YSI ODO |
| 1009 |
Vaisala GMP251/252
|
| 1010 | NexSens S500 |
| 1014 |
OTT ecoN/TriOS NICO/OPUS
|
| 1015 |
Seametrics PT12 vented level sensor
|
| 2000 | YSI EXO Sondes |
| 2001 |
Stevens Hydraprobe
|
| 2002 |
Vaisala WXT-Series Weather Stations
|
| 2003 |
Seabird SBE37-ODO
|
| 2005 | OTT RLS |
| 2006 |
Van Essen Diver
|
| 2007 |
OTT Thalimedes
|
| 2008 |
Observator NEP5000
|
| 2009 |
Sequoia LISST ABS
|
| 2010 |
Seametrics CT2X/TempHion
|
| 2011 |
ChannelMaster ADCP
|
| 2012 | Sontek IQ |
| 2013 |
Seametrics PT12
|
| 2015 |
Sutron AquaTemp
|
| 2016 |
Vegetronix SDI-12 adapter
|
| 2017 |
Campbell OBS500/501
|
| 2020 | Sequoia AOBS |
| 3000 |
Airmar 150/200WX
|
| 3001 | Nortek Aquadopp ADCP |
| 3002 |
Seabird SBE37-ODO
|
| 3003 | Airmar SS510 |
| 3004 |
Garmin 19/24xd HVS
|
| 3005 | AML Micro-X |
| 3006 | NexSens Environmental Web Camera |
| 3007 | RBR |
| 3008 |
MaxiMet GMX600 Weather Station
|
| 3009 |
NeoFox Solu-Blu CO2
|
| 3013 |
Eureka RS232 Manta Sonde
|
| 3014 |
Seaview SVS-603 wave sensor
|
| 3015 |
Nortek Signature1000 ADCP
|
Script Loading and Generation
Enable pre-loaded scripts by following the article below:
If the desired sensor is not within the list, use the following articles to create generic scripts in CONNECT based on the sensor’s communication protocol: