The MS8-BULK is a panel mount cable assembly with the MS8 female connector on one end and flying lead on the other end. To install the MS8-BULK it will be necessary to drill holes in the panel where it is to be mounted. See Figure 3 for proper drilling dimensions.

Included Accessories

  • (4) 4-40 1/2″ screws
  • (4) #4 lock washers
  • (1) Size 12 nut plate

Figure 1: MS8-BULK


Figure 2: Wiring for MS8-BULK


Figure 3: MS8 Female Pinout


Figure 4: Drilling Dimensions for MS8-BULK



REV: 13G29

Leave a Reply

Your email address will not be published. Required fields are marked *