The A60-OEM is used for power and/or communication to the OEM line of iSIC data loggers. The cable has an MS4 connector on one end to connect to the bottom of the iSIC-OEM and a flying lead for power and communication connections on the other end. The red and black wires can be connected to a 12VDC external power supply. The yellow and orange wires can be connected for communication to transmit and receive in Rs-232.

Figure 1: A60-OEM Cable



Figure 2: Wiring Table for A60-OEM MS4 to Flying Lead



REV: 13G29

Leave a Reply

Your email address will not be published. Required fields are marked *