NexSens iSIC data loggers incorporate a precision real-time clock. However, the clock can drift up to two minutes per month and regional time changes require the clock to be synchronized periodically. This can be done manually or automatically.

  1. Confirm that the computer clock is correct
  2. Open iChart with a current project
    1. iChart must be opened after the clock is set
  3. Select the data logger to be synced in the Navigation panel on the left
  4. Click Setup9-4-2015 2-50-09 PM
  5. Place a check in the Set iSIC time to PC time box
  6. Click Update iSIC9-4-2015 2-50-59 PM
  7. After the clock sync finishes click OK


REV: 15J04

Leave a Reply

Your email address will not be published. Required fields are marked *