The NexSens iSIC-OEM supports direct connect communication between a remote monitoring site and a computer base station. It is the most desirable system for a monitoring site that is under 250ft away from the monitoring station, and where a cable can easily run between the two.

Shown below is an example site:


iSIC OEM Typical Site

Figure 1: iSIC – OEM Typical Site


The above system consists of the following components:

  1. PC running iChart Software
  2. A60-A64-OEM RS232 Direct Connect Cable
  3. iSIC Data logger
  4. A22 20-Watt Solar Panel connected to external battery


REV: 13H05


Leave a Reply

Your email address will not be published. Required fields are marked *