(NEMA 4X Enclosure): 8.4” x 6.4” x 4.9” (inches)

iSIC OEM Enclosure

Figure 1: iSIC – OEM Enclosure


Analog Inputs: Standard: 4 differential or 8 Single-Ended | Optional: 4 differential or 8 Single-Ended additional | 0-2.5V auto range. 12-bit resolution.

Analog Outputs: Two 12-bit channels | 0-5V or 0-2.5V Programmable

Pulse Counters: One tipping bucket counter, max rate: 12Hz

Digital I/O Ports: Two standard generic I/O ports, two additional optional

SDI-12 Interface: One SDI-12 port for up to 10 SDI-12 sensors, v1.3 compatible

RS232 Interface: Four RS232 ports, two additional optional

RS485 Interface: One RS485 port | Can be configured as master or slave

Modbus Interface: RS232 or RS485 | Can be configured as master or slave

Internal Memory: 512k Flash memory – over 124,000 data points minimum

Power Requirements: Voltage: 10.7V to 16VDC

Typical Logger Current Draw: 3 mA sleep | 8 mA processing | 36 mA analog measurement

Temperature Range: -20°C to +60°C


REV: 13H02

Leave a Reply

Your email address will not be published. Required fields are marked *