The NexSens 5500-iSIC supports Wi-Fi connection between a remote monitoring site and a computer base station with an internet connection. It is the most desirable system for a monitoring site where a near by Wi-Fi connection is available at the remote site.

Shown below is an example site:


Figure 1: 5500-iSIC Typical Site


The above system consists of the following components:

1. Windows based computer running iChart Software
2. 5500-iSIC Wi-Fi Data logger
3. Sensor
4. Wireless router

iChart software communicates with the 5500-iSIC through Wi-Fi connection. The PC running iChart connects to the wireless router either via Local Area Network (LAN) as shown above or the Internet.


REV: 13G30



Leave a Reply

Your email address will not be published. Required fields are marked *