AVSS241608 Stainless Steel Enclosure

The stainless steel enclosure (Part # AVSS241608) is ideal for NexSens iSIC Data Loggers installed in harsh environments or vandal-prone areas. This enclosure may also be used to house the NexSens 26 A-Hr battery (Part # A03) for projects with power-hungry sensors and heavy cloud coverage. Each enclosure also comes with a triangle key (Part # A73) and lock to keep prying eyes away from the sensitive data logger and sensor wiring. This item adds durability and flexibility to a system. Standard stainless steel enclosure size is 24″x16″x8″.



Figure 1: Stainless Steel Enclosure

A56 Unistrut Mounting Kit

The unistrut mounting kit (Part # A56) allows for easy installation of the stainless steel enclosure to a pipe or wall. Simply install the unistrut kit onto the wall or pipe first and then mount the enclosure to it. Each kit contains two 18” lengths of unistrut and (4) channel nuts. The enclosure comes with the hardware required to attach itself to the channel nuts. However, hardware for mounting to a wall or pipe must is user-supplied.


Figure 2: Unistrut


Enclosure Wiring & Battery Storage

Inside each stainless steel enclosure is a terminal strip for easy connection of sensors and telemetry. The standard 8.5 Ah battery can be used inside of the iSIC enclosure or a 26 Ah
battery (Part # A03) can be positioned on the bottom of the stainless steel enclosure for higher power systems.


Enclosure Wiring Battery Storage

Figure 3: Enclosure Wiring (Note: Example Only)


REV: 13G09

Leave a Reply

Your email address will not be published. Required fields are marked *