iChart can be setup to automatically generate reports and place them in a user-specified folder. Refer to the iChart Data Reports article for more information on more options available in the Report Tool. 1. In a current iChart project file, click View | Report Tools. The Report Tools panel will appear. 2. Click on the […]
The Sync RTC Schedule is the interval in iChart that will automatically sync the iSIC clock with the PC clock. As with any embedded device, the iSIC clock can drift as much as two minutes per month. Especially where power scheduling is implemented, making sure the iSIC time and the PC time are the same is important. Set […]
After a project has been setup, there are two ways to change the configuration and setup: the Setup Device Wizard or the Navigation Panel. Setup Device Wizard To add new project information, select Project | Setup Device Wizard from the iChart menu. This will open the Setup Device Wizard where new project information (e.g., new sites or sensors) can […]
It is possible to send automatically generated email reports, alarms and alerts through iChart software. 1. Open iChart to begin. Go to Edit | Preferences. 2. The System Setup window should appear. Click Email/FTP. 3. Select the SMTP option. 4. Enter the sender’s information as it would appear in an email. In […]
1. To add a device to an existing project file, click Project | Setup Device Wizard. The Setup Device Wizard will appear. 2. Click Next. 3. In step 1 of the Setup Device Wizard, a new site may be added by entering a site name and clicking Add. If devices are being added to […]
