To begin viewing live data, simply plug the sensor into an available USB port on a computer running WQSensors software and click the Sensors tab.

Data should be displayed on screen and updated once per second. The serial number of the connected sensor and the time of the last logged reading are displayed on the bottom of the screen.

 

Click Sensors Tab to view live data

Figure 1: Click Sensors tab to view live data

 

Up to four individual WQSensors can be viewed at one time through the Sensors tab of WQSensors software, provided each one is plugged into a separate USB port on the computer running the software.

 

FourWQSensorsConnectedAtSameTime

Figure 2: Four WQSensors connected to a computer showing live data, serial numbers and the time of last readings simultaneously

 

REV: 13H09

Leave a Reply

Your email address will not be published. Required fields are marked *

Time limit is exhausted. Please reload CAPTCHA.