WQSensor Software requires the following minimum system configuration:

  • Pentium processor
  • 64 MB RAM
  • 100 MB hard drive
  • 2 MB video card
  • CD-ROM drive
  • Adobe Flash
  • Windows 2000 (SP1 or higher), Windows XP 32-bit, Windows Vista 32-bit, or Windows 7 32-bit

Following the initial software installation, USB communication with WQSensors will be enabled. Plug a WQSensor into an available USB port. Windows will automatically recognize it and start the Found New Hardware wizard.

The device driver should download automatically. If the computer does not find the device driver and install it automatically, it can be installed manually from the following location:

“C:\Program Files\NexSens\WQSensor\Driver\wqsensor.inf”

If unable to install the WQSensor device driver, contact NexSens Customer Support.

To Uninstall WQSensors Software

If it becomes necessary to uninstall WQSensors Software, click Settings in the Start Menu. Select Control Panel, followed by Add / Remove Programs. Follow the step-by-step instructions to remove WQSensor Software and all associated files.

 

 

REV: 13H17

Leave a Reply

Your email address will not be published. Required fields are marked *

Time limit is exhausted. Please reload CAPTCHA.