T-Node sensors can be connected to any iSIC data logger using the 1-Wire UW to MS8 Adapter.

 

MS8 to UW Plug

Figure 1: MS8 to UW Plug

 

First plug the temperature string into the adapter’s UW connector. Then attach the MS8 connector from the adapter to the mating MS8 port on the iSIC enclosure.

 

 

MS8 Connector

Figure 2: MS8 Connector on iSIC

REV: 13H08

 

Leave a Reply

Your email address will not be published. Required fields are marked *

Time limit is exhausted. Please reload CAPTCHA.