1. To add a 2100-iSIC to an iChart project file (.icr), click Project | Setup Device Wizard. The Setup Device Wizard will appear.
Figure 1: Setup Device Wizard
2. Click Next.
3. In step 1 of the Setup Device Wizard, add a site. Then click Next.
4. Highlight the site to which the iSIC is being added in Step 2 and select NexSens and 2100-iSIC. Click Add. The iSIC Data Logger Communication Properties window will appear.
Figure 2: 2100-iSIC Data Logger Communication Properties
5. Enter the correct iSIC address (if unknown, enter “0”), phone number, PC COM Port and details. Click OK.
Refer to the iChart category for more information on finishing the Setup Device Wizard.
REV: 13C26