User-wiring to a mV-RS485 adapter using a UW-FLx cable.

Only 0-2.5V sensor inputs are accepted. User must install voltage dividers if a chosen sensor has a higher native range.

Resistors must be wired in with 4-20mA sensors to convert signal to mV for adapter.

Adapter Receptacle PinSignalUW-FLx Plug PinUW-FLx Wire Color
1mV+8Green
2mV-7Blue
3100X Gain6Brown
4V+5Red
5No Connection4White
610X Gain3Yellow
7GND2Black
8No Connection1Orange

mV-RS485 Adapter Receptacle Pinout