RS-232 to USB Adapter The RS-232 to USB adapter is used for interfacing instruments with computers that do not have available DB-9 serial port connections.
|  |
|
MS8 to USB Adapter The NexSens MS8 to USB adapter provides power & communications from a YSI 6-Series sonde to computer or Windows Mobile device.
|  |
|
MS4-USB PC Interface Cable The MS4 to USB interface cable is designed to support iSIC-to-PC communication and is manufactured for use with both desktop and laptop computers.
|  |
|
MS8 to RS-232 Adapter Cable The TS-ADP PC Adapter Cable is required to log multi-point temperature data from NexSens Temperature Strings to a computer.
|  |
|
UW Cable Connectorization The NexSens UW cable connectorization service includes assembly, test, and setup of user-supplied sensor cables for communication to SDL500 data loggers.
|  |
|
UW-6090 Cable Adapter for YSI Sondes The UW-6090 is used to connect YSI 6-Series water quality sondes to NexSens SDL submersible data loggers or UW underwater cable assemblies.
|  |
|
UW to Flying Lead Cable The underwater plug connector to flying lead cable is used to wire external power and/or communications to the SDL500 submersible data logger.
|  |
|
A58 Male MS8 to Flying Lead Cable The A58 MS8 to flying lead cable offers a quick-connect sensor interface cable for iSIC data loggers.
|  |
|
A59 iSIC to Isco Interface Cable Using the A59 Interface cable, the NexSens iSIC data logger can trigger an Isco sampler to take a sample or run sampling programs based on logged parameters.
| |
|
A77 Cellular Modem Cable The A77 cellular modem configuration cable is included with the purchase of a 3100-iSIC data logger and is used for direct communication to the built-in cell modem.
|  |
|
A60-OEM MS4 to Flying Lead Cable The A60-OEM is used for integrate the iSIC-OEM into existing data collection platforms as an SDI-12 or Modbus slave device.
|  |
|