G2-UW Environmental Monitor
The NexSens G2-UW provides live data access to many compatible sensors. Included solar power pack and integral cellular system provide real-time data and notifications.
- QUICK SPECS
Simple Integration with SensorsConnect a sensor to the G2-UW's UW plug connector and let the system autodetect the pre-configured parameter output and being recording. No need to manually configure the logger to record the correct data.
Real-Time UpdatesAn embedded cellular modem provides live, customizable weather and water quality notifications on a mobile device or computer.
Fully Featured DesignThe G2-UW incorporates logger, transmitter, solar power, and online data management into a streamlined design. All equipment comes pre-mounted to a 2" NPT MAST. This simplifies setup and maintenance and allows the system to be used in a wide range of applications and environments. A customer simply needs to connect their sensor and the G2-UW begins recording and transmitting data.
WQData LIVE Web Data PortalView live and historic data in a simple and intuitive interface from any web-enabled device. WQData LIVE is optimized for mobile devices to provide a great experience regardless of screen size.
Remote ConfigurationNo need for a site visit to make configuration changes. Queue the commands online and the remote G2-UW will be configured on the next transmission connection.
|Mount||2" NPT pipe thread (Wall/Panel mount capable)|
|Material||Aluminum mast, polycarbonate enclosure|
|Dimensions||9.9" Width, 26” Height|
|Temperature Range||-30 to 80 °C|
|Memory||Over 20M data points before rollover (Over 30 years with 8 parameters and a 15 minute interval)|
|Sensor Connector||NexSens UW-8 receptacle|
|Power Pack||6W solar panel with 12V 6AHr SLA battery|
|Power Connector||NexSens UW-6 Receptacle|
|Communication||NexSens hosted Verizon 4G cellular modem|
|Transmission Trigger||Parameter threshold, time-based|
|User Interface||NexSens WQData LIVE 2.0 web portal|
|Log Interval||User configurable from 1 minute (15 minute default)1|
|User Parameters||Parameter list dependent on configuration of attached instrument|
|Diagnostic Parameters||Input Power, Internal Pressure, Internal Temperature, Internal Humidity, Cell Signal Strength, Cell Module Power, Processor Power, Processor Current, RTC Power, Cell Module Current, Cell Status|
|Compatible Sensors||APG PT-500 (Modbus Output), FloWav PSA-AV, NexSens T-Node FR, NexSens TS210, SonTek-IQ|