When T-Nodes are detected in iChart, a serial number will appear. iChart will list all of the T-Nodes on the detected string in order of their respective serial number. These steps will how show to detect and configure T-Nodes to work with iChart.
1. Open the project file in iChart.
2. Select Project | Setup Device Wizard from the menu bar.
3. Click Next until Step 3 is reached.
4. Select the data logger that the T-Node(s) are connected to.
5. Select NexSens from the drop down list and then select T-Node.
Figure 1: Selecting The T-Node sensor in the Setup Device Wizard
6. Click Add.
7. Select the port that the T-Node is connected to.
- Note: If the T-Node(s) are in "Port T", select 1-Wire.
8. Click Detect.
- Note: The number of serial numbers must match the number of T-Nodes.
Figure 2: Detecting the T-Node
9. Click Next until Step 6 is reached.
10. Click Program iSIC. Once the iSIC or SDL is successfully programmed, wait for the next interrogation to view the data.
NexSens strives to provide a rich database of FAQs and troubleshooting guides. If you don't find what you're looking for, though, or if you need additional support to resolve an issue, please contact a tech support representative using the option to the right.