Knowledge
Base
A60-OEM
The A60-OEM is used for power and/or communication to the OEM line of iSIC data loggers. The cable has an MS4 connector on one end to connect to the bottom of the iSIC-OEM and a flying lead for power and communication connections on the other end. The red and black wires can be connected to a 12VDC external power supply. The yellow and orange wires can be connected for communication to transmit and receive in Rs-232.
Figure 1: A60-OEM Cable
Table 1: Wiring Table for A60-OEM MS4 to Flying Lead
| Wire Color | iSIC Signal | MS4 Pin |
|---|---|---|
| Black | GND | A |
| Red | Power | B |
| Orange | Rx | C |
| Yellow | Tx | D |
Additional Help
NexSens strives to provide a rich database of FAQs and troubleshooting guides. If you don't find what you're looking for, though, or if you need additional support to resolve an issue, please contact a tech support representative using the option to the right.
NexSens strives to provide a rich database of FAQs and troubleshooting guides. If you don't find what you're looking for, though, or if you need additional support to resolve an issue, please contact a tech support representative using the option to the right.