Replacing the SD card on an iSIC-V2

    Caution!!!- Be sure to statically ground yourself prior to touching any of the electronics inside the iSIC V2 logger or the SD card itself Tools Required: -9/16″ Socket Wrench -5/32″ Allen Wrench Remove the UW-6 and UW-8 (if Equipped) connectors from the base of the iSIC V2 housing. Remove the (4) 3/8-16 bolts securing the […]

    Read More

    PM1 iSIC V2 Pole Mount

    The PM1 Pole mount kit is designed to attach an iSIC V2 to a buried 2″NPT Pipe for field deployment. Included (2) 5/16-18 x 2″ U-bolts (4) ea  5/16″ Flat Washers, 5/16″ Split Lock Washer, and 5/16″ Nut (2) Mounting Ear (4) 1/4-20x 7/16″ Flat Head Phillips Screw Mounting Install one of the mounting ears […]

    Read More

    NexSens X2/G2/iSIC-V2 Setup

    Step 1- Create WQData LIVE Account A  WQData LIVE account must be used in order to begin device setup on the web. If an existing account is not available for use, create a new one for free here. Clicking the ‘Sign In’ toggle will allow current users to log-in and claim the device into a […]

    Read More

    Data Display Settings & Quick Alerts

    A graphic (or tabular) data record of each enabled parameter is displayed on the Dashboard of the project beneath the site map. Through the Dashboard Settings menu, the display unit and precision of each parameter can be set as desired. Additionally, parameters that are useful to transmit, but not important to view regularly can be […]

    Read More

    Remote Device Configuration Menu Setup

    The Remote Device Configuration Menu is accessible through the project Dashboard for each logger and allows settings such as sensor sample and data transmission frequency to be configured. Note that any change made will be loaded into the Command Queue at the bottom of the menu for processing after the next scheduled transmission or power […]

    Read More

    Administrator Settings

    On the Project’s Admin tab, there are the following options available: Step 12- Add Project Collaborators Multiple users can view a project using unique account logins provided each e-mail address used has registered with a free WQData LIVE account first. The project owner or any administrator may give new users access by navigating to the […]

    Read More

    X2/iSIC V2 Alarm Setup

    Alarms for email or SMS notifications can be configured, managed, and checked through the Project Admin|Alarm Tab Step 14- Add New Alarm(s)   Set a Trigger Condition for when notifications will be sent. These can include multiple conditions and can be set up such that  any single parameter can trigger the alarm, or it can […]

    Read More

    Setting an APN on a Cellular iSIC V2

    Connect to iSIC V2 Logger Terminal Download the free open source terminal program Tera Term (or use a comparable terminal program) here. Select the link for the ‘teraterm-4.97.exe file’. The download will begin automatically. Complete the installation with the default components shown. Connect a RS485-USB cable to the PC. Allow Windows to download the driver automatically. […]

    Read More

    Installing a SIM Card into an iSIC-V2

    While it is always recommended that a SIM card be sent to NexSens for installation prior to shipment, in some cases it may be necessary for a user to install a SIM card themselves. The following article steps through this process. Caution!!!- Be sure to statically ground yourself prior to touching any of the electronics […]

    Read More

    Configuring an OTT RLS for Level Output on the iSIC-V2

    By default the OTT Radar Level Sensor outputs ‘distance to’ measurements in meters. When used in conjunction with an iSIC V2 data logger, it is often preferable to have the sensor report water level readings, relative to the floor of a basin. This requires that the total distance from the sensor head to the bottom […]

    Read More