In-Situ Rugged Troll 200

    Instructions for interfacing the In-Situ Rugged Troll 200 with a NexSens iSIC data logger. IMPORTANT: Review the manufacturer’s manual for the sensor to ensure that the sensor is properly configured for integration with a third party data logger prior to connecting the device to the iSIC.  1. Route cables and wires through one of the gland […]

    Read More

    Airmar 150WX Ultrasonic WeatherStation Instrument

    Instructions for interfacing the Airmar 150WX Ultrasonic WeatherStation Instrument with a NexSens iSIC data logger. IMPORTANT: Review the manufacturer’s manual for the sensor to ensure that the sensor is properly configured for integration with a third party data logger prior to connecting the device to the iSIC.  1. Route cables and wires through one of the gland […]

    Read More

    Garmin 17x/19x HVS GPS High-Sensitivity Antenna

    Instructions for interfacing the Garmin 17x/19x HVS GPS High-Sensitivity Antenna with a NexSens iSIC data logger. IMPORTANT: Review the manufacturer’s manual for the sensor to ensure that the sensor is properly configured for integration with a third party data logger prior to connecting the device to the iSIC.  1. Route cables and wires through one of […]

    Read More

    Sommer UPM-8 Ultrasonic Level Sensor

    Instructions for interfacing the Sommer UPM-8 Ultrasonic Level Sensor with a NexSens iSIC data logger. IMPORTANT: Review the manufacturer’s manual for the sensor to ensure that the sensor is properly configured for integration with a third party data logger prior to connecting the device to the iSIC.  1. Route cables and wires through one of […]

    Read More

    OTT CBS Compact Bubbler Sensor

    Instructions for interfacing the OTT CBS Bubbler Sensor with a NexSens iSIC data logger. IMPORTANT: Review the manufacturer’s manual for the sensor to ensure that the sensor is properly configured for integration with a third party data logger prior to connecting the device to the iSIC.  1. Route cables and wires through one of the gland […]

    Read More

    Measurement Specialties Eureka Manta2/Sub2

    Instructions for interfacing the Measurement Specialties Eureka Manta2/Sub2 with a NexSens iSIC data logger: IMPORTANT: Review the manufacturer’s manual for the sensor to ensure that the sensor is properly configured for integration with a third party data logger prior to connecting the device to the iSIC. 1. Route cables and wires through one of the […]

    Read More

    Switch WXT520 From SDI-12 to RS-232 ASCII Mode

    In order for a WXT520 to work with NexSens’ WeatherVIC software, it needs to communicate in RS-232 ASCII mode. 1)      Connect the WXT520 to a PC COM port. 2)      Open HyperTerminal set to 1200 baud, even parity, 7 data bit, 1 stop bit. 3)      Note that all text entered on the HyperTerminal is not displayed. […]

    Read More

    Sontek Argonaut Diagnostic Check

    In order to troubleshoot an Argonaut sensor it may be necessary to obtain information from the sensor’s internal memory and perform a diagnostic check. 1. Install Sontek ViewArgonaut software on a laptop. 2. Connect the UW-R to PC Interface cable to the UW cable coming from the Argonaut. 3. Connect the other end of the […]

    Read More

    Druck PTX 1830

    Instructions for interfacing the Druck PTX 1830 with a NexSens iSIC data logger: IMPORTANT: Review the manufacturer’s manual for the sensor to ensure that the sensor is properly configured for integration with a third party data logger prior to connecting the device to the iSIC.  1. Route cables and wires through one of the gland […]

    Read More

    Hydreon RG-11

    Instructions for interfacing the Hydreon RG-11 with a NexSens iSIC data logger: IMPORTANT: Review the manufacturer’s manual for the sensor to ensure that the sensor is properly configured for integration with a third party data logger prior to connecting the device to the iSIC. 1. Route cables and wires through one of the gland fittings installed […]

    Read More