Building a Radio SystemSpread spectrum radio telemetry systems from NexSens are designed to simplify environmental monitoring system design. The NexSens 4100-iSIC data logger features an integrated spread spectrum radio for real-time remote data collection via license-free radio waves from up to 5 miles line-of-sight.
Spread spectrum radios transfer the data from the remote field site to a nearby 4100-BASE radio. A computer is connected to the base radio and uses iChart software for real-time access to the sensor, data, and configuration settings. This setup has been shown to be a quick, inexpensive way to view data from remote sensors in real-time from the comfort of your office. 
| NexSens 1001 | iChart software | NexSens 4100-BASE | Spread spectrum radio base station | NexSens A31 | RF cable, low-loss, 10' | NexSens A41 | Omni antenna, radio frequency, 890-970 MHz | NexSens 4100-iSIC | iSIC data logger with spread spectrum radio telemetry | NexSens A55 | Pole/wall mounting kit | NexSens A38 | Ground kit | NexSens A22 | Solar power kit, 20-watt | NexSens A46 | Yagi antenna, radio frequency, 866-960 MHz | NexSens A31 | RF cable, low-loss, 10' | RM Young 05103V | Wind speed & direction monitor, 0-5 V | RM Young 41382VC | Relative humidity & temperature probe, degrees Celsius, 0-1 V | RM Young 41003 | Radiation shield, universal adapter (for sensors to 15mm diameter) | RM Young 61202V | Barometric pressure sensor, 0-5 V | RM Young 61002 | Pressure port with offset bracket | RM Young 52203 | Tipping bucket rain gauge |
| |
