Building a Cellular SystemCellular telemetry provides a large degree of flexibility as to where your environmental monitoring stations can be located. For applications where landline phone and radio telemetry is not feasible, cellular data telemetry systems provide a cost-effective remote access solution.
A NexSens cellular telemetry system consists of a 3100-iSIC, which includes an iSIC Data Logger with an integrated cellular modem. Cellular data accounts can be setup with all major providers including Verizon, AT&T, and Sprint/Nextel. The 3100-iSIC data logger connects to the Internet via the cellular provider's network (similar to a cell phone). A computer running iChart software interrogates the remote system(s) by connecting to the Internet and accessing the remote system data. 
| NexSens 1001 | iChart software | NexSens 3100-iSIC | iSIC data logger with cellular modem telemetry | NexSens A55 | Pole/wall mounting kit | NexSens A38 | Ground kit | NexSens A22 | Solar power kit, 20-watt | NexSens A49 | High gain antenna, cellular frequency, tri-mode, 2 dBd | NexSens A36 | RF cable, micro-loss, 6' | RM Young 05103V | Wind speed & direction monitor, 0-5 V | RM Young 41382VC | Relative humidity & temperature probe, degrees Celsius, 0-1 V | RM Young 41003 | Radiation shield, universal adapter (for sensors to 15mm diameter) | RM Young 61202V | Barometric pressure sensor, 0-5 V | RM Young 61002 | Pressure port with offset bracket | RM Young 52203 | Tipping bucket rain gauge |
| |
